Rigid one piece design ensures maximum strength at the highest tonnage.
H Frame press with full powered 3 axis control.
Superior ease of use and workmanship sets it apart as the best product offering in its class.
click on picture to enlarge
Standard features
Rigid one piece design ensures maximum strength at the highest tonnage.
H Frame press with full powered 3 axis control.
Superior ease of use and workmanship sets it apart as the best product offering in its class.
Low pressure hydraulic system maintains lower oil temperatures, resulting in higher efficiency and safer operation.
We use large bore cylinders averaging 3,800 P.S.I. maximum pressure throughout our complete line of H Frame Presses. Most other manufactures use small bore cylinders
at 700 bar equal to 10,152 P.S.I. operating pressure.
At RK Machinery operator safety is our number one concern.
All powered 3 axis are fingertip controlled.
Pressure regulator to limit the ram pressure.
All hydraulic and mechanical parts are standard in the industry, and available throughout North America.
Powered moveable workhead for off-center work allows operator to position the cylinder from left to right with the touch of a lever.
Open sides to facilitate work on long pieces.
Flat ram nose can be easily changed to allow the user to adapt the press to a specific job.
Self-locking table design eliminates lateral movement.
Standard feature on all H Frame Press models.
The more pressure that you apply to the workpiece, the more rigid the table and frame become.
V BLOCKS matched pair (optional).
Flat ram nose can be easily changed to allow the user to adapt the press to a specific job.
Options available
Stop / Start c/w emergency stop button, wired direct to motor. Model may vary depending on the voltage.
Pressing plate for a Hydraulic press. Table is precision milled.
Hydraulic Press V Blocks, matched pair.
Front safety guard for operator protection. Safety guard can be removed within a few seconds if necessary.
Adjustable stroke control c/w foot pedal-electric solenoid valve, speed control and electric control panel.
Operation of the safety kit: When any of the four guards are opened, the press will automatically go to jog mode "low pressure", unless the operator turns the key to the “on” position which will enable the operator to use the press at full pressure with the guards open.
Industrial side lights for better visibility.
Foot pedal-electric solenoid valve for hands-free operation, c/w electric control panel
Handheld wireless remote control with variable speed on all axis, permits the operator to move freely around the press.
Français
